Microphone and ducking
Settings → While dictating picks the microphone: a specific device, or Auto-detect, which follows the system input except that it prefers the built-in mic over a Bluetooth headset so AirPods keep their stereo. Duck other audio drops everything else to a quarter while you talk and restores it after. Hold-⌥ delay and Silence threshold tune a clipped first syllable or a quiet voice.
Choosing a microphone
Auto-detect is right for most people: it uses whatever macOS calls the input device, with one deliberate exception. When the system input is a Bluetooth headset, Auto-detect uses the built-in microphone instead, because recording from a Bluetooth headset's mic makes macOS drop the headset into its mono call profile for the whole take — sound in one ear, everything muffled. The built-in mic on a modern MacBook is excellent and your music stays in stereo. Want the headset mic anyway, for a noisy room? Pick it explicitly under Microphone; that works since 1.7.2.
Ducking
Duck other audio lowers everything else on the Mac while you hold ⌥ and puts it back when you let go. Ducked volume sets how far — 25% by default, from silent to 75%. The restore is careful: it comes back unless you turned the volume up yourself mid-take, which fixed a 1.5.0-era problem where a Bluetooth headset renegotiating its level could strand the volume at 25% after a take. Outside Incognito every duck and restore is written to the log, so a stuck volume can be traced.
Two knobs for a stubborn microphone
| Setting | Default | Turn it if |
|---|---|---|
| Hold-⌥ delay | 150 ms | Your first syllable is clipped (shorten it) or ⌥-chords sometimes start a take (lengthen it). See hotkeys for why the delay exists. |
| Silence threshold | Speech-level | Quiet speech comes back as “Didn't catch that” (lower it) or room noise produces takes (raise it). |
Interfaces, aggregates and unplugging
- Audio interfaces and aggregate devices work as microphones. On any device that is also an output, a notification chime used to end the take (macOS re-states the sample rate); fixed in 1.7.3 so only a real unplug, re-clock or channel change stops a recording.
- Unplugging mid-take — taking AirPods off, pulling a USB mic — finishes the take with what was heard and leaves FreeFlow ready on whatever mic is left (1.3.2).
- Virtual devices (Loopback, BlackHole) that report themselves oddly for a moment no longer bring down a take (1.3.1).
Questions people ask
Why does FreeFlow not use my AirPods microphone?
Because recording from it puts the headset into mono call mode for the whole take. Auto-detect uses the built-in mic instead; choose the AirPods explicitly if you want them.
Can I turn ducking off?
Yes: Duck other audio, off. Or set Ducked volume to 75% for a gentle dip.
My music stayed quiet after dictating
Update to 1.5.1 or later, where the restore no longer depends on the level being exactly where FreeFlow left it.
Does FreeFlow record when I am not holding ⌥?
No. The microphone opens on the hold (after the delay) and closes on release; nothing listens in between.